Tools
$64.00
- SRAM Thin Flange T47 Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames.
- This single-sided socket is used for installing and removing 52mm, 16-notch bottom bracket cups.
- The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto a 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets.
- Machined 6061 Aluminum Anodized Red
$62.49 - $62.99
If you have a mechanical out on the trail, Topeak's Mini 20 Pro folding tool saves the day. Its forged-aluminum body holds 20 tools including: 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen wrenches, a T25 and T10 Torx wrench, 14- and 15-gauge spoke wrenches, a cast-chromoly chain tool, aluminum tire lever, Phillips and flat-blade screwdrivers, and a bottle opener.
$39.99
Topeak's Mini 9 Pro folding tool is superlight and contains all the basics for road or trailside repairs. Its forged-aluminum body holds 9 tools including: 2, 2.5, 3, 4, 5, and 6mm Allen wrenches and a Phillips screwdriver. Two tire levers integrated into the tool's body help you repair that flat quickly and get back on the bike. Plus, this smart tool tucks neatly into its included neoprene case.
$199.99
Designed for riders and home mechanics, it is an ideal and durable tool set.
1-Freewheel turner
1-15mm pedal wrench
1-Freewheel remover for Shimano® and other cassetees lockrings, W/center pin
1-Spoke wrench for 0.127" nipple (black)
1-Spoke wrench for 0.130" nipple (green)
1-Spoke wrench for 0.136" nipple (red)
1-Mavic® spoke wrench (yellow)
2-Phillips 2, Slotted 6 screwdriver
3-Tire levers
9-T/L handle hex set, size:2/2.5/3/4/5/6/8/10mm,Torx® 25
$34.99
- 4-in-1 cable cutter
- Cuts cables and housing
- Crimps cable ends
- Crimps housing end caps
- Housing end reformer in the handle TB-4575
$66.00
Periodic hydraulic remote bleeds are necessary to maintain consistent performance. RockShox's Bleed Kit has everything you need to keep your Reverb and X-Loc remotes functioning at their best.
$30.00
- Required to bleed Reverb 1x remotes
- Compatible with Standard RockShox bleed kits
- Included with remote upgrade kit and Reverb 1x post
- Not compatible with SRAM brakes bleeding edge fitting
$71.00
- 50 hour service kit for Deluxe and Super Deluxe rear shocks
- Includes air can seals, piston seal, and glide rings
$24.00 - $63.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$22.99 - $27.00
RockShox 30mm Seal Kit
$23.00
RockShox Volume Reducer Kits
$65.99
As well as being available individually, our brushes are also available as a 4 piece brush set to help ensure every part of your bike has that showroom ready finish! With great value to the consumer (12.5% saving over purchasing each brush individually), the brush set consists of: 1x Bog Brush: 360 degrees of super soft durable bristles for clatter-free cleaning all over your beloved bicycle. 1x Detail Brush: Perfect for tight hard-to-clean gaps like suspension linkages, seat rails, hubs and more. 1x Drivetrain Brush: Angle your hands away from impact while brushing your chain & cassette to perfection. 1x Tyre Brush: Stiff, stepped bristles to quickly and efficiently bring your tyres back to factory fresh. All of the brushes are made from waxed Beech wood.
$30.59
The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.
$35.99
Made from high precision, hardened Cro-Moly steel, Park's Bottom Bracket Tool (External Bearing) can be turned with a 3/8" drive wrench, 1" wrench, or Park Tool FRW-1 Freewheel Remover Wrench (each sold separately).
$36.79
The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.
$27.99
The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.
$27.99
A worn bicycle chain can cause poor shifting and expensive drivetrain damage. The Park Tool CC-4.2 Chain Checker is a drop-in gauge that measures chain wear accurately. It contacts the chain in three places, eliminating guesswork. Compatible with 5 to 13-speed and single-speed chains, it indicates wear at 0.5%, 0.75%, and 1.0%, matching manufacturer replacement recommendations.
- Measures bicycle chain wear accurately, preventing expensive drivetrain damage
- Laser-cut design contacts the chain at three points, providing quick and precise wear measurement
- Compatible with 5 to 13-speed derailleur chains and single-speed chains
- Indicates chain wear at 0.5%, 0.75%, and 1.0%, aligning with manufacturer recommendations for replacement
$24.39
Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)
$34.79
Also called a sleeping hub, the Dummy Hub slides into rear dropouts and replaces the rear wheel for chain cleaning and transport. The DH-1 works with all derailleur and 1/8" chain. The unique design allows the bike to be shifted and works with open dropout and thru-axle frames up to 12mm.
$14.59
The Park FR-2 Freewheel Remover fits SunTour two-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel. (Not recommended for use with SunTour 4- and 6-notch freewheels.)
$25.99
Park's AWS-7 features a Y-shaped nylon handle with 4 and 5mm Allen wrenches and a T25 Torx wrench. This convenient 3-in-1 tool keeps commonly used wrenches together and offers an excellent grip as well.
$31.99
Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.
$31.99
Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!
$45.99
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
$12.19 - $14.99
Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.
$33.99
Park's Torx Wrench Set is just what you need to make repairs on many of your bike parts that use Torx (star-shaped) fittings, such as disc brakes, pedals, chainring bolts, and others. It offers the common bicycle wrench sizes (T7, T9, T10, T15, T20, T25, T27, T30 and T40) in a convenient fold-up set. Its composite handle is super strong, comfortable to use and slip resistant.
Page 1 of 2
Next page